Lead time is 4-6 weeks.
Our Patent Pending Dara Mounted Holster System using RAM Mounts™. Our new Mounted Holsters are 100% made in the USA and securely fastened to the RAM Mount™ diamond plate with 1" poly coated ball, using Melonite and Zinc coated hardened steel hardware. Our rugged Kydex/Boltaron holsters coupled with America's leading mounting structure, makes for the ultimate vehicle self defense and protection system.
The Standard Mounted Holster features an adjustable Military Grade Rubber retention system. The adjustable retention system can be tightened or loosened to the desired holding using a Philips head screwdriver.
This system comes with the RAM™ Flat Surface Mount, the diamond 1" poly coated ball base attached to the Dara Holster and stainless steel mounting hardware.
This holster can be mounted to:
-any vehicle, car or truck
-desk, night stand, end table, wall
-inside cabinets, drawers, closets
This holster is not intended to be a multipurpose holster. The base can be switched out for another Mounting System, they are not indended for OWB, IWB or pocket carry. Patent Pending
A Tutorial for the installation of the RAM Mounted Vehicle Holster by Dara Holsters & Gear. This video will show you how to mount the standard vehicle mounted holster, as well as the easy on/off Tough-Claw Vehicle Holster. Each Holster features an Adjustable Military Grade Rubber Retention System. Using 0.093" Kydex or Boltaron and fastened using a combination of Melonite coated chrome Molly steel and Black 316 INOX Stainless Steel hardware, our holsters don't just look good-they're built to last a lifetime. Each holster is 100% made in the USA and is backed by a lifetime warranty. Patent Pending. To purchase a Vehicle Mounted Holster, visit our website below: http://www.daraholsters.com/mounted-holsters
Posted by Carlos T on 29th Mar 2017
I previously have tried a few other much less quality vehicle based holsters until I ordered and received my DARA Glock 26 holster with Streamlight TLR-6 mold. DARA's customer service was also 5 star as I received a few emails for clarification prior to completion, from their staff. It was a 15 minute no-brainer installation with RAM mount and works perfectly in my RV. I'll certainly order a few more for my other vehicles.
Posted by Jordan Youngerman on 14th Mar 2017
Bought this holster for my G19 w/XC-1 light. Great fit. Ended up using Tough Claw adapter to clamp on my seat bar under drivers seat of my MB GLK. Got the ball on the right side of holster and perfect placement low front left of seat with Tough claw. Being left handed tough to find in car mounted holster that fits the bill. This set up is perfect.
Posted by Mark B on 22nd Dec 2016
Very well made rig. Perfect holster to gun fit. Light weight and mounts very solid. Once the ball joint is tightened, the entire assembly and gun stay where they are adjusted.
Posted by Alan on 26th Nov 2016
Great holster,great fit,sturdy when mounted in vehicle,ordered two more for family members
Posted by James T on 12th Nov 2016
I am very happy with my dara holster with the ram mount. I have it mounted in my 2005 Chevy pick up and it makes me happy seeing it right next to me in perfect reach if necessary while out of site at the same time. I also had special instructions for my Vickers Tactical Glock 19 with an extended magazine and slide release; they payed attention where it really mattered. I aslo was impressed with the extra hardware included. For me, this shows special attention to detail for the customers needs. More Companies/Government should take a lesson from these folks :)
Posted by Larry Turso on 25th Oct 2016
I have seen vehicle holsters a plenty at gun shows and online but immediately purchased this one when my son sent me a video from your company.
I love both how it mounts to my truck (2016 F250) and the convenience and ease with which I can remove it when needed.
The design is simple, the quality superb and I the only reason it doesn't get 5 stars is because the back plate (supplied) is thin plastic and could have cracked or split had I not been careful not to tighten too much. Otherwise, a wonderful product and I am extremely pleased.
I wanted to send in a photo or two but could not do so.
Thanks so much!
Dara Holsters: That thin plastic backing plate is actually a cut of .093 Boltaron and is most likely tougher then the dash panel it self.
Posted by Kory A Darnell on 25th Oct 2016
I've personally worked with plastic molds in a factory I know the things to look for when handling a plastic product, and these guys know what they're doing. the product is very clean and fits wonderfully. It took forever though, but I would rather have a great product that takes time than a decent one that's quick 10 out of 10 would buy again
Posted by mrlarry0001.com on 17th Oct 2016
This thing is great! It only took about 10 minutes to install in my truck and is a perfect fit for my Sig P226. Great product!
Posted by Chris on 16th Oct 2016
The holster is pretty standard, but the mount system can be coupled with other RAM products to make it fit better or suit your needs. I used a 2-3" ram arm to raise the holster at a better angle in my F-150
Posted by Unknown on 14th Oct 2016
Excellent quality and workmanship with the RAM set up, provides numerous possiblities for placement & access, and, weapon retention is very secure.
Posted by Unknown on 7th Sep 2016
Exceptional product at a fare price well made Thank You
Posted by Jacob D on 2nd Aug 2016
This holster is exactly what I was looking for for an intelligent mount in my vehicle. Much better than trying to draw from the hip or keeping it in the glove box. The hardware is easy to install and is high quality. Highly recommended for anyone who carries.
Posted by Kathryn Johnson on 26th Jul 2016
I searched all over the place and finally found what I was looking for in an under the desk holster. Recent changes in our town funding pulled the police presence away from us. I feel a lot safer knowing that I can access my gun as quickly as necessary in the event of an emergency without having to wear it all the time.
This holster fits my gun like a glove. I love it!
Posted by Ed O. on 24th Jun 2016
Installation was simple and the product is solid in both appearance and performance. The installation took approximately 10 minutes. It's great to see quality like this being produced in America. I will be placing another order soon and several of my colleagues have already placed orders after seeing the one installed in my vehicle.
Due to the location where I decided to mount the product in my vehicle I had to purchase longer bolts. I also opted to purchase hex head bolts so I could use a wrench/socket to tighten the nut as using a screw driver in the tight quarters was impractical. I painted the hex heads black and the final installation looks professional. The delivery of the holster also took 6 weeks. For these two reasons I choose to give this product 4 stars as opposed to 5 stars.
I would highly suggest that DARA include additional hardware specifically mounting bolts of different lengths. I would also suggest using hex head bolts instead of machine screws.
All in all the wait for delivery and need to purchase different hardware is a minor inconvenience for such a well made product.
Posted by Andrew L on 6th Apr 2016
Took a while compared to something off the shelf but worth it. Comes at "no tension" level and you get to set it the way you feel comfortable. Pictures do not do it justice.