Light bearing Kydex RMR Cut OWB Holster

Now: $82.99
(You save )
(10 reviews) Write a Review
Gift wrapping:
Options available


The Custom RMR Cut OWB Holster is designed to accommodate any firearm with a red dot sight mounted to the top of the slide. This holster fits outside the waistband with a minimalist design that leaves no extra material weighing you down. The top of the holster is cut away enough to clear the sight, leaving everything else covered. Care is taken while molding to accommodate suppressor height sights that you may have. Using thick .093" Boltaron/Kydex, and fastened with Melonite coated Stainless Steel hardware, our product may be the toughest in the business. This product is covered under a lifetime no BS warranty and 100% satisfaction guarantee.

Don't forget to check out our OWB Mag Carriers, as well as our IWB Holsters to get the most out of concealed carry.

Please choose your exact make and model. Failure to mention any details that influence the external dimensions of your firearm will result in fitment issue.

How to Order:


Start by choosing your firearm model. We have two drop down menus that list each Manufacturer and Model in alphabetical order. If you don't see your firearm, we may not have that model available just yet. You can contact Customer Support to see if your model is available.


Holster Color:
The next step is choosing your Holster Color. We do provide swatches on the order form, but larger pictures can be found on our FAQ page here.


Draw Hand:
Choose how you'd like to carry the holster. If you plan to carry using a method not listed on the drop down menu, please see if your specific carry method is listed under the 'SHOP HOLSTERS' section on the main menu at the top of the page.


Belt Attachment:
Choose your desired belt attachment from the drop down menu, along with the corresponding belt size. 1.5" is the most common belt size. 1.75" is most common for tactical belts, and 2"-2.25" is common for duty belts.


Ride Height:
This is how your holster and firearm will sit in relation to the belt, vertically. A low ride height put the grip of the gun lower in the belt line. Be careful with a low ride height, as the grip of the firearm can become buried easily with a reverse cant angle. A mid ride height, which is the most common, will put the top of the belt in line with where the trigger guard meets the frame. The high ride height will put the holster higher up on the belt, giving you a full grip. To see the ride height and cant angle chart, scroll through the product pictures.


Cant Angles:
We offer many different cant angles conducive to every carry method. If you plan to carry at the hip, you'll want to choose a straight draw (0° cant) or forward cant angle. The forward cant angle tilts the grip up and forward and the muzzle backwards. If you want to carry crossdraw, you'll need to choose a reverse cant angle, which tilts the grip down and back, the muzzle forward.


Custom Notes / Photo Upload:
This is where you'll want to bring any customizations up. We need to know about switched magazine release buttons, extended mag release buttons, suppressor height sights and other such modifications.


Warranty Information


Additional Details

Military or LE? Let us know before you order!:

10 Reviews

  • 5
    Great holster

    Published by Erik Leff on 11th Jan 2019

    I ordered this holster for my Glock 19 Gen 5 MOS FS with suppressor sights, Vortex Venum red dot and a streamlight tlr-7. It was delivered quicker than expected. The holster fits my 19 perfectly. I am very pleased and will be ordering again soon.

  • 5
    Fits like a glove

    Published by Ove on 18th Dec 2018

    Perfect fit for my Glock 19 Gen 3 with RMR and Olight PL-Mini Valkyrie. I had to make an adjustment to the order shortly after it was placed and it was implemented flawlessly and without issue. Great product and customer service. Highly recommended.

  • 5

    Published by Charles on 2nd Oct 2018

    Well I like the holster, but I don't like the single belt loop. I used it in a competition the holster is well made. But I do not recommend you get the single belt loop.

  • 5
    Light bearing Kydex RMR Cut OWB Holster

    Published by Wayne on 29th Jun 2018

    great product
    excellent customer service

  • 5
    Glock 17 MOS + APL

    Published by Drew on 1st May 2018

    This holster is just what I needed. I have it mounted on my nightstand instead of being stored in the drawer. The G17 has a Trijicon RMR and an Inforce APL as well as a threaded barrel and suppressor height sights. The holster fits the gun like a glove. I had been considering a holster for my setup for a while, but I never got around to ordering one. Thankfully, I waited until I found this one. It's awesome.

  • 5
    M&P 9L

    Published by o on 21st Mar 2018

    Always quality. I requested them to make it accommodate a 5" barrel that was not listed as an option, they did a flawless job. Tight fit with APL Inforce and optic cut RMR was on point. Thank you!

  • 5
    Sig P320c + APLc (Glock)

    Published by Jason Coon on 7th Oct 2017

    I wanted an Inforce APLc for my Sig P320c, but only the Glock versions were shipping. So I picked one up and it fits the P320c perfectly. Several other holster manufacturers refused to make a holster accommodating the APLc for anything other than Glock pistols. Dara took the order, delivered a well made and perfectly fitting holster, and did it a full week faster than their posted lead time. I'm very satisfied and will continue to use Dara for additional holsters.

  • 5
    Glock 40 MOS RMR Cut Light Bearing Holster

    Published by Chris Goodwin on 1st Oct 2017

    Locating a holster for the Glock 40 is difficult enough, and finding a light bearing model is practically impossible.
    Luckily Dara now makes this holster (after myself and others requested it), and the quality of the product is unbelievable. the kydex is very thick, and the fit to the firearm is perfect right out of the box.
    The customer service is hard to bear as well. After several emails back and forth with Alia, my order was perfect and all of my questions had been answered. I'm glad to see their holsters are 100% American made in the US, and this company will be getting plenty of business from me in be future.

  • 5
    Glock 19 with RMR and streamlight holster

    Published by F. Grant on 6th Jul 2017

    To say this holster is the best I have would not do the product justice. The fit is perfect and the draw extremely smooth with great weapon retention. While there was a long wait compared to other manufacturers that was clearly spelled out before I placed the order. The materials used are the best I've ever seen on a holster. You have a customer for life. If your looking for a "perfect" holster don't hesitate to buy from this company, I will never buy anywhere else again.

  • 5
    Good Workmanship

    Published by Larry Chong on 6th Jul 2017

    This is my second holster from Dara. Their workmanship is first rate. Their detail to the holster is awesome. My pistol fits like a glove. Material is top notch. Well worth the wait.

Related Products

Customers Also Viewed

Subscribe to our newsletter

Get the latest updates on new products and upcoming sales

No thanks